## Accept device verification

`client.App.Verifications.Accept(ctx, verificationID) (*AppVerificationAcceptResponse, error)`

**post** `/v1/app/setup/verifications/{verificationID}/accept`

Accept an incoming device verification request.

### Parameters

- `verificationID string`

  Verification ID.

### Returns

- `type AppVerificationAcceptResponse struct{…}`

  - `Session AppVerificationAcceptResponseSession`

    Current app sign-in and encrypted messaging setup state.

    - `E2EE AppVerificationAcceptResponseSessionE2EE`

      Encrypted messaging setup status.

      - `CrossSigning bool`

        Whether this account can verify trusted devices.

      - `FirstSyncDone bool`

        Whether the first encrypted message sync is complete.

      - `HasBackedUpRecoveryKey bool`

        Whether the user confirmed that they saved their recovery key.

      - `Initialized bool`

        Whether encrypted messaging setup has started.

      - `KeyBackup bool`

        Whether encrypted message backup is available.

      - `Secrets AppVerificationAcceptResponseSessionE2EESecrets`

        Encrypted messaging keys available on this device.

        - `MasterKey bool`

          Whether the account identity key is available.

        - `MegolmBackupKey bool`

          Whether the encrypted message backup key is available.

        - `RecoveryKey bool`

          Whether a recovery key is available.

        - `SelfSigningKey bool`

          Whether the device trust key is available.

        - `UserSigningKey bool`

          Whether the user trust key is available.

      - `SecretStorage bool`

        Whether secure key storage is available.

      - `Verified bool`

        Whether this device is trusted for encrypted messages.

      - `RecoveryKeyGeneratedAt float64`

        Unix timestamp for when the recovery key was created.

    - `State string`

      Current sign-in and encrypted messaging setup state for Beeper Desktop or Beeper Server.

      - `const AppVerificationAcceptResponseSessionStateNeedsLogin AppVerificationAcceptResponseSessionState = "needs-login"`

      - `const AppVerificationAcceptResponseSessionStateInitializing AppVerificationAcceptResponseSessionState = "initializing"`

      - `const AppVerificationAcceptResponseSessionStateNeedsCrossSigningSetup AppVerificationAcceptResponseSessionState = "needs-cross-signing-setup"`

      - `const AppVerificationAcceptResponseSessionStateNeedsVerification AppVerificationAcceptResponseSessionState = "needs-verification"`

      - `const AppVerificationAcceptResponseSessionStateNeedsSecrets AppVerificationAcceptResponseSessionState = "needs-secrets"`

      - `const AppVerificationAcceptResponseSessionStateNeedsFirstSync AppVerificationAcceptResponseSessionState = "needs-first-sync"`

      - `const AppVerificationAcceptResponseSessionStateReady AppVerificationAcceptResponseSessionState = "ready"`

    - `Matrix AppVerificationAcceptResponseSessionMatrix`

      Signed-in account details. Omitted until sign-in is complete.

      - `DeviceID string`

        Current device ID.

      - `Homeserver string`

        Beeper homeserver URL for this account.

      - `UserID string`

        Signed-in Beeper user ID.

    - `Verification AppVerificationAcceptResponseSessionVerification`

      Trusted device verification progress.

      - `ID string`

        Verification ID to pass in verification action paths.

      - `AvailableActions []string`

        Verification actions that are valid for the current state.

        - `const AppVerificationAcceptResponseSessionVerificationAvailableActionAccept AppVerificationAcceptResponseSessionVerificationAvailableAction = "accept"`

        - `const AppVerificationAcceptResponseSessionVerificationAvailableActionCancel AppVerificationAcceptResponseSessionVerificationAvailableAction = "cancel"`

        - `const AppVerificationAcceptResponseSessionVerificationAvailableActionQrConfirmScanned AppVerificationAcceptResponseSessionVerificationAvailableAction = "qr.confirmScanned"`

        - `const AppVerificationAcceptResponseSessionVerificationAvailableActionSASStart AppVerificationAcceptResponseSessionVerificationAvailableAction = "sas.start"`

        - `const AppVerificationAcceptResponseSessionVerificationAvailableActionSASConfirm AppVerificationAcceptResponseSessionVerificationAvailableAction = "sas.confirm"`

      - `Direction string`

        Whether this device started or received the verification.

        - `const AppVerificationAcceptResponseSessionVerificationDirectionIncoming AppVerificationAcceptResponseSessionVerificationDirection = "incoming"`

        - `const AppVerificationAcceptResponseSessionVerificationDirectionOutgoing AppVerificationAcceptResponseSessionVerificationDirection = "outgoing"`

      - `Methods []string`

        Verification methods supported for this transaction.

        - `const AppVerificationAcceptResponseSessionVerificationMethodQr AppVerificationAcceptResponseSessionVerificationMethod = "qr"`

        - `const AppVerificationAcceptResponseSessionVerificationMethodSAS AppVerificationAcceptResponseSessionVerificationMethod = "sas"`

      - `Purpose string`

        Why this verification exists.

        - `const AppVerificationAcceptResponseSessionVerificationPurposeLogin AppVerificationAcceptResponseSessionVerificationPurpose = "login"`

        - `const AppVerificationAcceptResponseSessionVerificationPurposeDevice AppVerificationAcceptResponseSessionVerificationPurpose = "device"`

      - `State string`

        Current trusted-device verification state.

        - `const AppVerificationAcceptResponseSessionVerificationStateRequested AppVerificationAcceptResponseSessionVerificationState = "requested"`

        - `const AppVerificationAcceptResponseSessionVerificationStateReady AppVerificationAcceptResponseSessionVerificationState = "ready"`

        - `const AppVerificationAcceptResponseSessionVerificationStateSASReady AppVerificationAcceptResponseSessionVerificationState = "sas_ready"`

        - `const AppVerificationAcceptResponseSessionVerificationStateQrScanned AppVerificationAcceptResponseSessionVerificationState = "qr_scanned"`

        - `const AppVerificationAcceptResponseSessionVerificationStateDone AppVerificationAcceptResponseSessionVerificationState = "done"`

        - `const AppVerificationAcceptResponseSessionVerificationStateCancelled AppVerificationAcceptResponseSessionVerificationState = "cancelled"`

        - `const AppVerificationAcceptResponseSessionVerificationStateError AppVerificationAcceptResponseSessionVerificationState = "error"`

      - `Error AppVerificationAcceptResponseSessionVerificationError`

        Verification error details, if verification stopped.

        - `Code string`

          Verification error code.

        - `Reason string`

          User-facing verification error message.

      - `OtherDevice AppVerificationAcceptResponseSessionVerificationOtherDevice`

        Other device participating in verification.

        - `ID string`

          Other device ID.

        - `Name string`

          Other device display name, if known.

      - `OtherUserID string`

        Other Beeper user participating in verification.

      - `Qr AppVerificationAcceptResponseSessionVerificationQr`

        QR verification data.

        - `Data string`

          QR code payload to display for verification.

      - `SAS AppVerificationAcceptResponseSessionVerificationSAS`

        Emoji or number comparison data for verification.

        - `Emojis string`

          Emoji sequence to compare on both devices.

        - `Decimals string`

          Number sequence to compare on both devices.

  - `Verification AppVerificationAcceptResponseVerification`

    Trusted device verification progress.

    - `ID string`

      Verification ID to pass in verification action paths.

    - `AvailableActions []string`

      Verification actions that are valid for the current state.

      - `const AppVerificationAcceptResponseVerificationAvailableActionAccept AppVerificationAcceptResponseVerificationAvailableAction = "accept"`

      - `const AppVerificationAcceptResponseVerificationAvailableActionCancel AppVerificationAcceptResponseVerificationAvailableAction = "cancel"`

      - `const AppVerificationAcceptResponseVerificationAvailableActionQrConfirmScanned AppVerificationAcceptResponseVerificationAvailableAction = "qr.confirmScanned"`

      - `const AppVerificationAcceptResponseVerificationAvailableActionSASStart AppVerificationAcceptResponseVerificationAvailableAction = "sas.start"`

      - `const AppVerificationAcceptResponseVerificationAvailableActionSASConfirm AppVerificationAcceptResponseVerificationAvailableAction = "sas.confirm"`

    - `Direction string`

      Whether this device started or received the verification.

      - `const AppVerificationAcceptResponseVerificationDirectionIncoming AppVerificationAcceptResponseVerificationDirection = "incoming"`

      - `const AppVerificationAcceptResponseVerificationDirectionOutgoing AppVerificationAcceptResponseVerificationDirection = "outgoing"`

    - `Methods []string`

      Verification methods supported for this transaction.

      - `const AppVerificationAcceptResponseVerificationMethodQr AppVerificationAcceptResponseVerificationMethod = "qr"`

      - `const AppVerificationAcceptResponseVerificationMethodSAS AppVerificationAcceptResponseVerificationMethod = "sas"`

    - `Purpose string`

      Why this verification exists.

      - `const AppVerificationAcceptResponseVerificationPurposeLogin AppVerificationAcceptResponseVerificationPurpose = "login"`

      - `const AppVerificationAcceptResponseVerificationPurposeDevice AppVerificationAcceptResponseVerificationPurpose = "device"`

    - `State string`

      Current trusted-device verification state.

      - `const AppVerificationAcceptResponseVerificationStateRequested AppVerificationAcceptResponseVerificationState = "requested"`

      - `const AppVerificationAcceptResponseVerificationStateReady AppVerificationAcceptResponseVerificationState = "ready"`

      - `const AppVerificationAcceptResponseVerificationStateSASReady AppVerificationAcceptResponseVerificationState = "sas_ready"`

      - `const AppVerificationAcceptResponseVerificationStateQrScanned AppVerificationAcceptResponseVerificationState = "qr_scanned"`

      - `const AppVerificationAcceptResponseVerificationStateDone AppVerificationAcceptResponseVerificationState = "done"`

      - `const AppVerificationAcceptResponseVerificationStateCancelled AppVerificationAcceptResponseVerificationState = "cancelled"`

      - `const AppVerificationAcceptResponseVerificationStateError AppVerificationAcceptResponseVerificationState = "error"`

    - `Error AppVerificationAcceptResponseVerificationError`

      Verification error details, if verification stopped.

      - `Code string`

        Verification error code.

      - `Reason string`

        User-facing verification error message.

    - `OtherDevice AppVerificationAcceptResponseVerificationOtherDevice`

      Other device participating in verification.

      - `ID string`

        Other device ID.

      - `Name string`

        Other device display name, if known.

    - `OtherUserID string`

      Other Beeper user participating in verification.

    - `Qr AppVerificationAcceptResponseVerificationQr`

      QR verification data.

      - `Data string`

        QR code payload to display for verification.

    - `SAS AppVerificationAcceptResponseVerificationSAS`

      Emoji or number comparison data for verification.

      - `Emojis string`

        Emoji sequence to compare on both devices.

      - `Decimals string`

        Number sequence to compare on both devices.

### Example

```go
package main

import (
  "context"
  "fmt"

  "github.com/beeper/desktop-api-go"
  "github.com/beeper/desktop-api-go/option"
)

func main() {
  client := beeperdesktopapi.NewClient(
    option.WithAccessToken("My Access Token"),
  )
  response, err := client.App.Verifications.Accept(context.TODO(), "x")
  if err != nil {
    panic(err.Error())
  }
  fmt.Printf("%+v\n", response.Session)
}
```

#### Response

```json
{
  "session": {
    "e2ee": {
      "crossSigning": true,
      "firstSyncDone": true,
      "hasBackedUpRecoveryKey": true,
      "initialized": true,
      "keyBackup": true,
      "secrets": {
        "masterKey": true,
        "megolmBackupKey": true,
        "recoveryKey": true,
        "selfSigningKey": true,
        "userSigningKey": true
      },
      "secretStorage": true,
      "verified": true,
      "recoveryKeyGeneratedAt": 0
    },
    "state": "needs-login",
    "matrix": {
      "deviceID": "deviceID",
      "homeserver": "homeserver",
      "userID": "userID"
    },
    "verification": {
      "id": "id",
      "availableActions": [
        "accept"
      ],
      "direction": "incoming",
      "methods": [
        "qr"
      ],
      "purpose": "login",
      "state": "requested",
      "error": {
        "code": "code",
        "reason": "reason"
      },
      "otherDevice": {
        "id": "id",
        "name": "name"
      },
      "otherUserID": "otherUserID",
      "qr": {
        "data": "data"
      },
      "sas": {
        "emojis": "emojis",
        "decimals": "decimals"
      }
    }
  },
  "verification": {
    "id": "id",
    "availableActions": [
      "accept"
    ],
    "direction": "incoming",
    "methods": [
      "qr"
    ],
    "purpose": "login",
    "state": "requested",
    "error": {
      "code": "code",
      "reason": "reason"
    },
    "otherDevice": {
      "id": "id",
      "name": "name"
    },
    "otherUserID": "otherUserID",
    "qr": {
      "data": "data"
    },
    "sas": {
      "emojis": "emojis",
      "decimals": "decimals"
    }
  }
}
```